Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For Efoil Esurf ESK8

Spec:

• 1.8-inch super clear and big screen display

• Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information

• Be compatible with Flipsky FSESC/FTESC and other VESC and Non-VESC

• ESK8 mode / E-surf mode switching freely

• Esurf mode：Cruise speed control function

• Waterproof IP rating: IP67

• Bigger remote battery capacity:1500MA

• ESC failure report ：Detect possible failures of the ESC in time for replacing

• Controller mode: PPM/UART

• Charging way:Wireless Magnetic Charging

• VX3 Pro Remote comes with Receiver (support Flipsky non-vesc)

• Support online upgrade firmware

Feature:

1. Replace the communication module with SX1280;
2. The transmitter microcontroller is replaced with GD32F303CGT6;
3. Add FTESC ESC UART control protocol;
4. Add UART, PPM, UART&PPM control modes;
5. Function switching is changed to joystick up and down switching control;
6. Add gear lock function;
7. Add low battery alarm function for skateboards and surfboards;
8. Add total mileage display function;
9. The maximum wheel diameter can be set to 999mm;
10. Add the function of modifying the default gear at startup;
11. Add whether the cruise mode/reverse function is turned on and can be modified;
12. The maximum number of wheel gears can be set to 999mm;
13. Optimize the screen refresh frame rate and faster data refresh display.

Wiring Diagram: