Matek PM12S-3 Power Module - 3-12S LiPo Input W/5V 9V Dual BEC & Heatsink

Matek PM12S-3 POWER MODULE

Wide 9V to 55V Operating Input Range with TVS protection
3x independent Step-Down Voltage Regulators
BEC Vx,  5.2V / 6V / 8V output options.  supports typical continuous output current of up to 15A, Peak current of up to 25A.
BEC 5V (Fixed), 4A continuous
BEC 12V (Fixed), 4A continuous
1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
Current sensor signal passthrough pad
Size & Weight: 61x40x15mm, 53g

BEC Vx
Output voltage 5.25V / 6V / 8V options.
Output voltage tolerance 1.5%
Synchronous switching step-down (or buck) regulator with typical efficiencies of 90% to 96%
Supports typical continuous output current of up to 15A,  Peak current of up to 25A.
Output ripple  32mV (VIN=50V,  Output 5.25V @ 15A),  43mV (VIN=50V,  Output @ 5A)
Standby current: 10~20mA
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery
Tip: Input voltage >= 15V is required for continuous output current of 15A

BEC 5V
Output voltage 5.2V, tolerance 1.5%
Supports continuous output current of up to 4A,  Peak current of 6A
Output ripple  20mV (VIN=24V,  Output @ 5A),  50mV (VIN=50V,  Output @ 5A)
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery

BEC 12V
Output voltage 12V, tolerance 1.5%
Supports continuous output current of up to 4A,  Peak current of 6A
Output ripple  18mV (VIN=24V,  Output @ 5A),  32mV (VIN=50V,  Output @ 5A)
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery
Tip: Input voltage >= 13V is required for stable 12V output

Packing
1x PM12S-3
1x Low ESR capacitor ZLJ 63v 390uf
Tips: If the input voltage is noisy, capacitor is required to be soldered to the input pads