BETAFPV
BETAFPV Matrix 1S AIO P1 HD Flight Controller – 12A ESC & ELRS 2.4GHz
BETAFPV Matrix 1S AIO P1 HD Flight Controller – 12A ESC & ELRS 2.4GHz
No se pudo cargar la disponibilidad de retiro
Create a lightweight digital whoop with the Matrix 1S AIO P1 HD flight controller. It combines the G473 FC, brushless ESC, serial ELRS receiver and P1 Air Unit on one board, reducing wiring for ArtLynk digital FPV builds.
Check out all our Whoop Style AIO Flight Controllers and the rest of our BetaFPV Products!
Specifications
| Battery input | 1S only |
|---|---|
| ESC | 12A continuous / 18A peak; Bluejay; DShot300/600 |
| MCU | STM32G473CEU6 |
| Receiver | Serial ExpressLRS 2.4GHz; BETAFPV 2.4G AIO V2 RX target |
| Video system | Onboard P1 Air Unit, ArtLynk protocol |
| VTX | 5.1–5.9GHz; 200mW |
| Live view | 1080p at 60fps; approximately 60ms latency |
| Blackbox / BEC | 16MB / 5V, max. 3A |
| Mounting / dimensions | 25.5 × 25.5mm / 30.5 × 30.5mm |
| Board thickness | 1.0mm |
| Board weight | 4.60g excluding antenna and camera |
| Connections | BT2.0 battery; gold-plated JST1.25 motor connectors; SH1.0-4Pin USB adapter |
Version and compatibility notes
Uses the ArtLynk video system: select compatible P1/ArtLynk receiving equipment and the matching Air HD camera. Camera and receiving equipment are not listed in the supplied package and must be purchased separately. The onboard P1 firmware is v2.1.2; BETAFPV P1 receiving devices require v2.1.3 for compatibility. Use only firmware matching the AIO V2 RX target. Install the VTX antenna before powering on and provide cooling during bench setup.
Package includes
Matrix 1S AIO P1 HD flight controller, Type-C adapter, SH1.0-4Pin cable, 5.8G antenna, mounting screws, four H1.2mm shock absorbing balls and user manual.
Compartir
