RCINPOWER GTS V3 0802 vs EVO 0802 Pro: Which FPV Motor Should You Choose?
Compartir
Choosing an 0802 motor for a Tiny Whoop is not just a matter of buying the highest KV option. The right choice depends on your frame, propellers, battery, all-up weight, flying style and the motor options your ESC can support. Two RCINPOWER options worth comparing are the GTS V3 0802 and the EVO 0802 Pro 28800KV.
This guide compares the specifications currently listed for both products at FPVStoreRC. It is a specification-based buying guide, not a claim that one motor has won a controlled thrust-stand or flight test.
See the two 0802 motors before you choose
Use the product photos to check the physical layout, then verify your own frame, motor plug, shaft, propeller hub and flight controller before ordering. The links above lead to the current product pages, where the selected KV version and availability should always be confirmed.
Quick answer: GTS V3 0802 or EVO 0802 Pro?
Choose the GTS V3 0802 if you want more KV choices to match an existing 1S setup: the store listing offers 22000KV, 25000KV and 27000KV versions. Choose the EVO 0802 Pro if you specifically want the 28800KV version and your 1S Tiny Whoop build is designed to use that higher-KV motor.
Neither option is automatically best for every 65mm, 75mm or 85mm whoop. Check the motor plug, mounting, shaft, propeller clearance, battery and ESC compatibility before ordering.
RCINPOWER 0802 motor comparison
| Specification | GTS V3 0802 | EVO 0802 Pro |
|---|---|---|
| Listed KV options | 22000KV / 25000KV / 27000KV | 28800KV |
| Stator size | 8 × 2mm | 8 × 2mm |
| Listed battery | 1S LiPo | 1S LiPo |
| Listed weight | 1.97g | Exact weight not stated in the current product specification list |
| Product positioning | Micro FPV / Tiny Whoop motor with three KV choices | High-KV motor for Tiny Whoop and indoor micro racing |
| Product page | View GTS V3 0802 | View EVO 0802 Pro |
Specifications above are taken from the current FPVStoreRC product listings. Always confirm the exact version and compatibility details on the product page before purchase.
1. GTS V3 0802: three KV options for more flexibility
The RCINPOWER GTS V3 0802 listing offers 22000KV, 25000KV and 27000KV versions. All three are listed with an 8mm × 2mm stator, a 1mm shaft and a weight of 1.97g. The product listing specifies 1S LiPo input.
Having three KV choices gives builders more flexibility when matching a motor to a particular propeller, battery and flying style. Rather than assuming the highest KV is always the fastest or most suitable, consider the complete power system and how much throttle authority you want.
- 22000KV: the lowest-KV option in this listing. Consider it when you want to start with the more conservative of the three listed KV choices.
- 25000KV: the middle option if you want a step up from 22000KV without selecting the highest listed KV.
- 27000KV: the highest-KV GTS V3 option, for builds whose battery, propeller and ESC setup are appropriate for it.
These are selection cues based on the relative KV ratings, not measured flight-time or thrust rankings. Actual results depend on the full build.
2. EVO 0802 Pro 28800KV: a higher-KV option
The RCINPOWER EVO 0802 Pro is listed at 28800KV with an 8mm × 2mm stator. FPVStoreRC lists it for 1S Tiny Whoop builds and identifies 65mm, 75mm and 85mm micro frames, 1-inch whoop propellers and 300–450mAh 1S LiPo batteries as its intended setup context.
At 28800KV, the EVO 0802 Pro has a higher nominal KV rating than any of the three GTS V3 0802 options listed here. That makes it worth considering for pilots deliberately building around a higher-KV 0802 motor. It does not, by itself, prove that the motor will deliver more usable thrust, better efficiency or longer flight time in every build.
Before choosing it, confirm your ESC, motor connector, propeller load and battery are suitable. A higher KV rating should be treated as one part of the setup decision, not a substitute for checking compatibility.
3. What does KV mean on an 0802 Tiny Whoop motor?
KV is the motor's approximate no-load RPM per volt. It is not a direct measurement of thrust, top speed or efficiency. With the same battery voltage, a higher-KV motor has a higher theoretical no-load RPM, but the propeller load, motor design, battery voltage under load and ESC all affect real-world performance.
For a practical 0802 motor comparison, use this checklist:
- Confirm the battery cell count and voltage supported by the motor and ESC.
- Check propeller diameter, pitch and blade count.
- Match the motor mounting pattern, shaft diameter and connector.
- Consider the finished drone's weight, including battery and camera.
- Use the manufacturer's recommendations for the exact motor revision.
0802 motor installation: fit before you fly
For a clean 0802 motor swap, remove the propeller before working on the quad, route the motor wires without pinching them, and check that the bell spins freely before fitting the prop. After connecting the motor, verify motor direction in your flight-controller configurator with props removed, then install the correct propeller orientation. This is a practical installation check, not a substitute for the instructions for your particular frame or flight controller.
4. Which RCINPOWER 0802 motor should you choose?
Choose GTS V3 0802 when…
- You want to choose among 22000KV, 25000KV and 27000KV.
- You are replacing an existing 0802 motor and want to compare several KV options.
- You prefer to select KV around your current propeller and battery setup rather than defaulting to the highest rating.
Shop RCINPOWER GTS V3 0802 at FPVStoreRC
Choose EVO 0802 Pro when…
- You specifically want the listed 28800KV version.
- Your Tiny Whoop setup is designed for a high-KV 0802 motor.
- Your frame, 1S battery, propellers and ESC are compatible with the motor.
Shop RCINPOWER EVO 0802 Pro 28800KV at FPVStoreRC
5. Check these details before upgrading
Before replacing your current Tiny Whoop motors, compare the old and new motor's stator size, shaft, mounting, connector, KV and weight. Also check the propeller hub fit and whether the ESC firmware and current capability are appropriate for the motor and propeller combination.
One important detail: the GTS V3 product listing identifies 1S LiPo input, while some power and current figures on the same listing carry 3S test labels. Do not use those figures as a recommendation to run this 0802 motor on 3S. Confirm operating voltage and test conditions with the manufacturer if you need those electrical limits.
Frequently asked questions
Is 28800KV always better than 27000KV?
No. KV alone does not determine overall performance. The best choice depends on the propeller, battery, ESC, frame and flying style. The EVO 0802 Pro's 28800KV rating is higher on paper, but that does not establish that it is the better option for every Tiny Whoop.
Are both motors 0802 size?
Yes. Both product listings identify an 8mm × 2mm stator. Still confirm mounting, shaft and connector details before ordering.
Can I use either motor on a 1S Tiny Whoop?
Both FPVStoreRC listings identify 1S use. Confirm that your exact frame, ESC, connector and propeller are compatible with the selected version.
Which KV should a beginner choose?
Start with the frame or drone manufacturer's recommended KV range. If you are choosing between these listings, compare the three GTS V3 options and the EVO's 28800KV against your existing setup rather than selecting the highest number by default.
Where can I compare more RCINPOWER motors?
Visit the RCINPOWER FPV Motors brand page at FPVStoreRC to explore more motor sizes and series.
Final thoughts
The GTS V3 0802 and EVO 0802 Pro serve builders who want different KV choices within the 0802 format. GTS V3 offers three listed KV options—22000KV, 25000KV and 27000KV—while EVO 0802 Pro is listed at 28800KV. Choose based on the requirements of your complete Tiny Whoop setup, and verify compatibility before you buy.
Explore both options and the wider RCINPOWER motor range at FPVStoreRC to find the right parts for your next micro FPV build.