Flipsky FT60BD Dual ESC 60V 120A with heatsink

Specifications : 

• Firmware: V1.4 or above (firmware update via Flipsky ESC Tool supported)

• Voltage: 14V-60V (safe for 4S-12S)

• Continuous Current: 60A / Single; 120A / Dual (Values depend on the mounting and ambient temperature around the device)

• Peak Current: 150A / Single; 300A / Dual

• Communication Ports: USB, CAN, UART, PPM, ADC

• Input Signals Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only at present), PAS

• Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored), Encoder (ABI, AS5047 encoder SPI interface)

• BEC: 5V@1A

• Multiple Speed Gear Levels: Low, Medium, High, Reverse

• Front Lights, Rear Brake Lights & Horn: Support

• Programmable: Yes

• Regenerative Capacity: Yes

• Slide Poweron & Auto shutdown: Yes. Auto poweroff time can be customized

• Self-resetting switch with green LED button Diameter: 16mm

• Power Wire Size: 12AWG

• Motor Wire Size: 12 AWG

• ESC Size: L85 * W70 * H25mm (including heatsink)

Features:

• Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.

• 240MHz and the max PWM switching frequency 45KHz improves the motor RPM.

• Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways. 

• Programmable via Flipsky remote controller VX4 (remote firmware version: VX4_V1.4.0 or above).

• Supporting motor FOC with low working noise and smooth starting.

• Supporting Real-time data and fault alerts.

• Supporting adaptive variable PWM frequency control.

• Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).

• Supporting control types: Current, Duty Cycle, Speed control, Position Control

• Protection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection.

• Integrated smart switch function: supports sliding poweron and automatic shutdown function; automatic shutdown time is adjustable via Flipsky ESC Tool.

• Supporting extra interface like front lights, brake lights and horn fixtures (12V 4A).

• Supporting multiple typed of motor t emperature sensors such as NTC-10K-25℃, NTC-10K-100℃, PT1000, PTC-1K-100℃, KTY and so on.

Wiring diagram: